DR4100 MIB files
HiAre there MIB files for the DR's and is it possible to query them via SNMP?/Peter
View ArticlePowerEdge T420 will not Recognize Powervault 114X
Hi all,I have a PowerEdge T420 running Server2012 R2 and am trying to connect my Powervault 114X with a RD1000 Hard Disk drive that I bought in 2010. The server reports a USB problem and will not...
View ArticlePowerVault MD3260 - Disk Access and MD Storage Array Software
Hi fellow storage lovers,I have two quick questions.1) Could you point me in the right direction to documentation on the correct procedure to access the sliding disk bays on this unit WHILE it is...
View ArticlePV 124T LTO5 or 6 drive replacement
What model number of LTO5 or LTO6 drives is compatible with this 124T array? My drive is bad (showing ERROR: driveTAflag(31) hardware B). It came with an LTO6 drive. passes all other tests.Ive try...
View ArticleML6010
I'm trying to ship a ML6010 but I'm missing the device that holds the robot arm steady during shipping. Does anyone know where I can get one or what else I need to do to ship a ML6010?
View ArticleStuck Tape in Drive for PowerVault Tl2000
I have rarely used the robotic library for back ups and now when I do, it's not working. When I perform a move of tape from drive to I/O I receive the message "HE: drive unload timeout - Code: F5"....
View ArticleMD3820i Configuration PVCF_EXCEPTION
I am setting up a new MD3820i and while applying changes in the Configuration Utility I get the following error: Unknown Error (PVCF_EXCEPTION). The unit reports itself as optimal. What causes this and...
View ArticlePV TL4000 driver problem with SAS attached PE R810 server
Building a Poweredge R810, SAS HBA card/cables and Powervault TL4000 tape library using Windows server 2012 R2. Device mgr shows IBM Total Storage 3573 Tape Library, location 2 (Bus Number 0, Target...
View ArticleMD3420 SAS on 2 x R630 vSphere ESX 6.0 Path Policy - Recommendation?
Hi everyone,what is the recommendation for the vsphere storage path policy? Fixed, Round Robin or Most Recently Used?2 x R630 (ESX 6.0) HBA on MD3420 connected with 4 sas cable.Best regards,Dennis
View ArticleMD3000 question
Hi,Currently our MD3000 is connected with only one ISCSI connection (RAID controler module 0 port 0), becuase we have some read speed issue and the host server has one more free nic, we think it would...
View ArticleMD3800f telnet
Hello,Have some one known telnet root and password for accessing to controller?Thank you.
View ArticleMD3800i - How can we achieve this with CSV?
We have two physical hosts (256GB RAM/dual 14 core processors/SSD's etc) both connected to an MD3800i using multipath (set up with the Dell storage software).So from both physical hosts I can...
View ArticleML6000 Password recovery/reset
I have an ML6000 that was purchased used from a company that was consolidating data centers. Once we powered the unit on we went to login to the OCP using admin/password. This didn't work and we are...
View ArticleMD3200 Reset to Factory Default
Have a MD3200. Note, this is NOT the MD3200i. Just the MD3200.Booting up one of the controllers says error threshold exceeded. Client_Corrupt_DB_Detected_On_Alt.The other controller says Warning...
View ArticleMD3200i Unreadable Sectors
Hi,We recently had a disk fail in our MD3200i and at the time, unreadable sectors on paricular volume were reported. We've replaced the disk and rebuilt ok but the unreadable sectors message is still...
View ArticleMove MD3000i LUN to New Server
Currently have a single Windows Server 2008 R2 box with two mapped drives to my MD3000. I am getting ready to bring up a new server and wish to disconnect one of these mapped drives and connect it to...
View ArticleMD3000i with Server 2012
I am getting ready to upgrade several of my older Server 2008 R2 boxes to Server 2012. One of my boxes has connections to an MD3000i. I ran across a thread on a different forum *suggesting* the...
View ArticleFaulting application error on Windows 2012 Server
On one of my Windows 2012 servers, I frequently see the following error. Anyone knows what this is about? I have a feeling this is causing slowness at times on the server. Any help will be highly...
View ArticleTL2000 robotic communication fail
We are seeing an error with our TL2000 unit. error on the front panel: Rob. Comm-ErrorB2 03we have upgraded firmware and drive software. Tried a factory reset of all configuration. Tried reseating...
View ArticleR720 MD3400 issues
Hello,Trying to connect an R720 to an MD3400, but the Storage Manager does not recognize the MD3400 is attached. We are using the 406-BBDM LSI 12Gb SAS 9300-8e HBA controller that was selected when we...
View Article