MD3000i Loss of Communication in Controller
I have a MD3000i with dual controllers.One of my controllers (Slot 0) is currently has a loss of communication (component reporting problem is "Thermal Sensor") and all data is currently failed over to...
View ArticleMD3620i Remote Replication - Best Practise
HiI have some questions over the best way to configure remote replication on a pair of MD3620i arrays.I have the replication working but my questions are more about the most supportable...
View ArticleDiskGroup Failed on MD36xxf
Hi,Early this week we lost a physical disk, the rebuilt to the hot spare worked well and was finished. Then last night another drive failed, that make our 41TB Disk pool to fail. So this morning I...
View ArticleConflicting messages
I will apologize in advance for not being able to provide great detail to this question, since my server in question is currently down/ dead.We have an older PowerVault NX200 that has been in service...
View ArticleDell MD3620i
H I have a raid 5 disk group, we suspected a disk was going bad so it was replaced and the disk group rebuilt itself.After this it was found that the disk was not faulty, so my question is if I put the...
View ArticlePowerVault 124T magazine eject
Is there a way to eject the magazines in the 124T when there is no power to the unit?
View ArticlePower vault TL2000 Tape Library Admin Password Locked
Hello,We Have Dell Power vault TL 2000 Tape Library initially it had problem with robotic movement so I updated Latest Firmware D10 after that I cannot use Operating Control Panel showing error...
View ArticlePowerVault MD3000i Hard Drive Replacement
Greetings .I have a PowerVault MD3000i with two failed Hard drives, the MODEL number on them is ST31000640SS , Barracuda ES.2 , Firmaware MS04 Serial Attached SCSI (SAS) 1000GB RPM:7200 Config Code...
View ArticlePowerEdge 1850 with PowerVault 220s - WIndows 2003 Server 32 bit boot up...
Hi,Have a weird issue with our PowerEdge 1850 server connected to s SCSI PV 220s disk array.When the array is connected the server Windows 2003 boots up to a blank black screen. We cant RDP to it or do...
View ArticleMD3000i - RAM Parity error
Hello,Service tag# 14610001789Red light on the front, iSCSI ports on one controller keep turning off, and when they're on, just the link light, no activity. Tried forcing it over to the primary by...
View ArticleTL1000 - Restore defaults
Hello,I forgot the 4 digits pass to unlock TL1000. I have the web access, but, i don't know how can i restore defaults. Don't have any options about it.Thanks
View Articlemd3000 degraded drive channel
my md3000 is telling me:Degraded Physical Disk ChannelStorage array: SAN_01 Degraded physical disk channels: 0, 1I've collected a 542kb Support Bundle...but this forum has a 500 kb upload limit,...
View ArticleWhich PowerEdge Lowest Noise?
I have a PE T610 that is used as a workstation and is installed in a habitable room rather than in a dedicated server room.Fan noise is a little on the high side so i am looking for ways slow down the...
View ArticleMax disk size in a PowerVault MD1000?
The latest support matrix -- last updated in 2012 -- shows only 2TB drives.We are approaching the year 2016. Is 2TB still the maximum drive size usable in an MD1000? Is there any reason that filling...
View ArticleProblems with PowerVault TL2000 and IBM ULT3580-HH3
Hello, Could you help me with the following problem:Since a couple of weeks ago suddenly my unit started failing and the backup software (backup Exec 2010) shows tape alerts frequently.I've updated the...
View ArticleDell Powerfault MD 1220 - Cannot Read Data
Dell Powerfault MD 1220 - Hard drive shows data but cannot access. Disk Manager says to Initialize. This sits at a Datacenter offsite. I'm told there are Amber lights flashing and I just found out its...
View ArticleDirect-Attached MD3860f Array, 60x 8TB drives, and creating a 300 to 400 TB...
(repost from the EQ forum, where I put this the first time, by mistake)We're extending the storage for a PE 730xd backup server with 24 internal drives by adding an FC-attached MD3860f aray, with 60x...
View ArticleML6000 how to reset admin password
Admin/password doesn't work on web UI, How do we reset this on a ML-6000?
View ArticleMD3200 cant see host identifier in MDSM
I has a Windows failover cluster consists of 2 PE 720 servers and MD3200 SAS array and I need to upgrade it to 2012R2 from 2012. Also I have MD3600i connected to this cluster for temporary VM storage...
View Article