MD3000i 4011 error
Hello, a customer just had this error on their MD3000i:" Node ID: CorSAN1Host IP Address: horse.wlv.com/172.16.1.39 Host ID: horse.wlv.com Event Error Code: 4011 Event occurred: Feb 9, 2014 3:26:17 AM...
View ArticleEnabling Jumbo Frames on MD3220i SAN
I am trying to setup Jumbo Frames on my Virtualised System.To do this I have done the following:1) Enable Jumbo Frames on my Dell MD3220i SAN by checking the "Enable jumbo frames" box for each port and...
View ArticleMD3000i 4011 error
Hello, a customer just had this error on their MD3000i:" Node ID: CorSAN1Host IP Address: horse.wlv.com/172.16.1.39 Host ID: horse.wlv.com Event Error Code: 4011 Event occurred: Feb 9, 2014 3:26:17 AM...
View Articlepowervault 3200 with openSUSE 12.1
Hi,* Host - DELL powerEdge 1800 with "LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2"* Storage Array - DELL poweVault 3200 (no iSCSI)* Have attached the above mentioned storage array to...
View Articlesmcli to do two things
HiI had a long read and not sure if I understand how to do the following on two virtual disks that I have;1. Rename the virtual disk from DPTEST1 to DPTEST22. Delete the virtual disk I have, called...
View ArticleClik here to view.
Replacement RAID Backup battery NX3000
HiI have a failed RAID battery on a Dell PowerVault NX3000The RAID card is a PERC H700 Integrated. I can see where the battery is located in the manual and how to replace it but I can't power down the...
View ArticleAdd MD1200 to existing MD1220
Hi, I have MD1220 in place and I would like to add MD1200 to it. Is it possible or it has to be MD1220? Thanks..
View ArticleDell Power Vault 124T LTO-2 tape auto-loader compatible with Arcserve backup...
We are using Power Vault 124T LTO-2 and Arcserve backup r11.5 for backup, and we are going to upgrade the Arcserve backup to r16.5, can Power Vault 124T LTO-2 still support the new version?
View Articlemd3000i controller failure after battery replacement
Hey all, thanks for taking the time to read through my problem.I'm a new admin for this company and haven't had very much experience with the MD3000i. According to my boss the admin before me tried to...
View ArticleMd3220 and md1220 combo, how to configure none global hot spares.
The MD3220 is full of 300GB 15K SAS drives The MD1220 is full of 1TB NL "SAS" 7.2K drives. Both enclosures have disks 22 & 23 unused with the intention of being hot spares. However all mechanisms I...
View ArticleReconfigure Option RAID 10
I have the MD1220 with PERC H810. I created a set of virtual disks on one set of 16 Hard drives on RAID 10. I am trying to extend the size of one of the virtual disks, but the "Reconfigure" option is...
View ArticleOne r420, one Md3220, yet two hosts in Dell software
The r420 has two dell 6Gbs SAS cards in it. Under "Default group" it lists "host EMFPCROSBN12" and that is just mapped to "access" (under properties of EMFPCROSBN12 it lists several SAS addresses I...
View ArticleMD3600I HDD Issue
Hi,I'm a novice with dell powervault and generally storage :). I have a MD3600i with 24TB of HDD. I made these into Raid 10 and now i have almost 12TB of Disk. I attached this with ISCSI to a ubuntu...
View ArticleDevice-mapper multipath failing path keeps happen
Hello,Recently find the MD3220 multipath keeps failing and caused the performance drop. However that is no idea what happen about it. Hope someone from here can help us. OS is RHEL 6.5 nowFollowing...
View ArticleClik here to view.
MD3000i Individual Physical Disk - Degraded Path error
We had a disk failure and replaced the disk but are still left with an Individual Physical Disk - Degraded path error in the Recovery Guru. Is there a way to clear this since everything else appears...
View ArticleSAS Drive firmware update using CD
I have an R720 server with three PERC H810 controllers, each controller has several MD1200's attached. I need to update the HDD firmware on each of those drives. I have downloaded and used the...
View ArticleDell PowerVault NAS Operating System Reinstall
I have a PowerVault NX 3100 I am trying to rebuild from scratch. The documentation says to use the Dell PowerVault NAS Operating System Reinstall CD however I don't have that. I've looked at the...
View Articlemd3220 VSS for backup software
This question refers to VSS snapshots that some backup software use (eg backup exec) All the other enclosures I have had (IBM/HP) you need to configure a "snapshot space" when doing VSS enabled backups...
View Articlehelp please
hi everyone I got a big problem with my md3000i , I cant change any luns or virtual disk on the storage I am getting errors from the storage every time I tried to change major configuration, I...
View ArticlePowerVault 124T Freezing
Hello,I have a PowerVault 124T that keeps freezing at somewhat random intervals but it seems to happen when it is idle for an extended period of time like over the weekend. By freezing I mean the whole...
View Article