I have an issue with a recently created disk Virtual Disk. I went in to look at the MD3000 through the Modular Disk Storage Manager today and I have a message that says:
Degraded Virtual Disk.
Storage Array: NAME
Disk Group: Exchange_Data_R10
Raid Level : 1 (It should be 10)
Virtual Disks: Exchange
Status: Degraded - partially complete disk group.
------
I look at Physical Disk tab under STorage Array profile and don't see any errors. I Also look at Disk Group Tabs and see the error there, but it doesn't have any useful information.
Below is informatino from Disk Group Tab:
Name: Exchange_Data_R10
Status: Degraded - partially complete disk group
Capacity 836.689 GB
RAID level: 10
Physical Disk type: Serial Attached SCSI (SAS)
Enclosure loss protection: No
Current owner: RAID Controller Module in slot 0
Associated virtual disks and free capacity
Virtual Disk Capacity
Exchange 836.689 GB
Associated physical disks - present (in piece order)
Enclosure Slot
0 8 [mirrored pair with physical disk at enclosure 0, slot 7]
0 6 [mirrored pair with physical disk at enclosure 0, slot 5]
0 4 [mirrored pair with physical disk at enclosure 0, slot 3]
0 7 [mirrored pair with physical disk at enclosure 0, slot 8]
0 5 [mirrored pair with physical disk at enclosure 0, slot 6]
0 3 [mirrored pair with physical disk at enclosure 0, slot 4]