Hello,
I got a problem with my MD3000i. It all of a sudden when to this state without any warnings.
This what it's doing. Sold amber sold light and rebooting.
I only see two errors on the com port.
Error #1:
Attaching interface lo0... done
Adding 9768 symbols for standalone.
Error
01/15/15-23:36:38 (GMT) (tRootTask): NOTE: I2C transaction returned 0x0423fe00
Error #2:
01/15/15-23:37:35 (GMT) (tRAID): PANIC: SubRecordStartOfDay::versionConvert exce ption caught DbmVersionException: recType: 11, Bad Version: 2
I have try booting one with just one raid controller in slot 0 as well as switching the other raid controller into slot 0. No change still got the same error.
Can't MDSM as the device is rebooting :(.
I have also try an new chassis, thinking it was the chassis. Still the same error.
However I was able to the device to stop rebooting and boot by taking out all the drives. Then I was able to connect via MDSM. But there were no event logs, array configurations..... It's like it swipe unless all that data is store on the drives?
I also took out all drives and put 3 in new hard drives and the device boot.
I am guessing something is wrong with the data on the drives or raid controller?
If something is wrong with the data on the drives how is this possible when all drives shows up healthy?
Anyways I am stumped.
Hope someone can help or advise me.
Regards,
Kyle Hacker