Hello,
Iam having trouble with my tape library iscsi bridge, my scerario are:
1- Someone configured an ip on it before then it was not being used for long and the configuration was not documented.
2-I did a factory reset on the tape so i could try the default ip that is 10.10.10.10 (i follow the Iscsi bridge configuration manual)
3- i set an ip address on my laptop (10.10.10.11 with mask 255.255.255.0) and i connected my CAT5e cable on each port of the Iscsi bridge to ping 10.10.10.10 but i was not succeed, i need help so that i can have my iscsi bridge working, and one thing i notice is that the connection between my laptop and the iscsi bridge is at 10MB os speed is that NORMAL... Help help