Hi,
My MD3000 decided to give up, and after trying for the past few weeks to get it to work, its now time to let it go.
It has currently 10 x 300GB seagate disks installed, and i would like to use those disks in our MD3200i, which has 7 spare slots.
It has 5 x 500GB seagate disks installed.
The 3200i is off site, so i cannot tell if the hot swop caddies are the same, any ideas?
if they are and the drives will fit, what is the best way to get those drives setup in the 3200i without causing downtime?
The data on the disks from 300GB can be lost without issue, but we have to retain the data on the existing disks on the 3200i.
regards
Phil