We have just setup two new servers with san in the following configuration: Dell R620 x2 with 2012 hyper configured in a cluster connected to MD3220 via SAS with one SAS cable on each of the 2 onboard controllers.
Dell Openmanage is reporting failed two drives on 6Gbps SAS HBA controller 0 and 1. Upon checking the MD3220 no drives have failed.
Below is an extract from the logs
ID 0:7 Status Critical Name Physical Device 0:7 State Failed Execute Bus Protocol SAS Media HDD Revision 0784 Capacity 0.00GB Used RAID Disk Space 0.00GB Vendor ID DELL Product ID MD32xx Serial No. Negotiated Speed 6.00 Gbps SAS Address 590B11C406C46904
Has anybody encountered errors similar to these?
Cheers,
Dave