hi,
i've a MD3000i storage with 8 disk and 2 raid module. the md3000i, and the only server, is connect in the switch (one switch for public and one for private).
the creation of the array works without problem, but i can create only one virtual disk. when i try to create the second virtual disk, the software give me this error:
Error 1008 - Could not communicate with the RAID controller module in slot 1 to complete this request.
Possible causes include network or connection problems, RAID controller module problems, or no power to the host or storage array. Check these possible causes and then retry the operation. If you suspect a RAID controller module problem, use the Recovery Guru to resolve the problem.
the status is good, and i don't know why i can do this operation. the other problem is that i can't change the network settings of the iscsi host port module number 1. the error is the same of the virtual disk.
how i can resolve it?
tnks