Hi All,
Having a strange issue on a SAS MD3000i enclosure. Had a failed disc on here. Data transitioned over to the hot spare. I have now replaced the disc, and added an additional hot spare. MDSM states that the " storage arrays status is being fixed" but there are no copy back operations in progress. This disc was replaced over 48hrs ago. When I view the logical disc it still shows the hot spare in use but it also shows the replaced disc sort of in the array. When I click on the physical discs section in MDSM it reflects that the drive has been replaced but is not optimal. Wondering if the drive firmware could be the culprit however, the drive set as the hot spare is the same firmware and seemed to respond without issue. Any assistance would be appreciated. I have gathered and attached a support bundle and the enclosure profile.
Make and model: Dell MD 3000i
Enclosure firmware: 06.50.32.60
Thanks,
Jeremy